CHLORGUARD ELECTRIC E10 CONTROL PANEL
ChlorGuard E10 failsafe control panel to allow automatic/manual/isolate positions for up to 10 Chlorine cylinders:
| Supply | 90Vac-264Vac, 50Hz/60Hz/1ph |
|---|---|
| Max Input Current Consumption | 4.8Amp for 110Vac, 2.4Amp for 230Vac |
| Size | 500mm W X 700mm H X 260mm D |
| IP Rating | IP65 rated |
| Battery Backup | 8 hours (can be increased upon request) |
| Number of Drives | Up to 10 drives per panel for E10 |
| Lamp Status Actuator | Mains Supply Healthy |
| Operation | System Low Battery/Charging |
| Remote Stop | Remote stop button connection available |
Volt free telemetry signals available as follows.
a) Mains power failure NC/NO contact
b) Alarm condition NC/NO contact
c) Lever not in auto position NC/NO contacts
d) Low battery NC/NO contact
e) Valve closed NC/NO contact
24Vdc power connections for strobe light or beacon to indicate:
a) Alarm condition not cancelled by reset button
| Part Number | Description |
|---|---|
| 107DA3001-02 | 2-Way Control Panel Electric E10 |
| 107DA3001-04 | 4-Way Control Panel Electric E10 |
| 107DA3001-06 | 6-Way Control Panel Electric E10 |
| 107DA3001-08 | 8-Way Control Panel Electric E10 |
| 107DA3001-10 | 10-Way Control Panel Electric E10 |